Linksys E4200 Router
The Linksys E4200 Maximum Performance Wireless-N Router lets you access the Internet via a wireless connection or through one of its four-switched Gigabit Ethernet ports. With the built-in Storage Link, you can easily add gigabytes of storage space onto your network using USB 2.0 hard drives, or plug in a USB flash disk to access your portable data files. The E4200′s built-in media server streams music, video and photos from an attached storage device to any UPnP-compatible media adapter or player.
Simultaneous dual-band Wireless-N
• USB storage port with built-in media server
• Gigabit Ethernet ports for high-speed wired devices
• Cisco Connect software for easy setup and maintenance
How to setup Linksys E4200 router:
You can setup your router with the help of Cisco connect software that comes with the router, Make sure that you have active Internet connection through the modem. Connect the main computer directly to the modem and make sure that you can access the Internet through the modem.
Connect the modem to the Internet port and computer to Ethernet port on the router. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router. Now run the Cisco connect software.
This software will setup your router automatically. It will create 2 wireless networks. One for your main network and other one for the guest people. You can connect your own computers and devices to the main wireless network. The guest network can be used for the people who want to access the Internet only. Guest network is a virtual wireless network to access the Internet through your router. The computers connected to the guest network will be able to access the Internet only. These computers will not be able to access your main network and files and computers and printers in the main network.
You can manage guest network settings using the web interface of the router. So it is not necessary to install the Cisco connect software to manage guest network as it was the case in E1000, E2000 and E3000 wireless routers. In these routers the guest network can be created and managed only using the Cisco connect software. For E4200 router Linksys has included Guest network settings using web UI of the router. The wireless connection speed using E4200 will be 300+ mbps. All the ports on E4200 router are Gigabit ports.
If you have a USB storage device then you can connect the USB storage device to the router and share it within the network. Computers connected to the guest network will not be able to access the USB storage device.
How to Reset Your Printer? Troubleshooting for Resetting Your HP, Dell, Lexmark, Brother or Samsung
Ever faced problems with resetting your printer? Well, here we provide you invaluable tips to help you troubleshoot your HP, Dell, Lexmark, Brother or Samsung Printers in easy steps.
Resetting an HP laser printer
There is a technique known as cold resetting. It basically will set all your HP printer settings to the factory default levels. It is important to note that any settings made at the control panel of your printer are going to be reset. Hence, in case you happen to have a JetDirect card then even the IP address will be reset to the factory defaults. You can try to reset NVRAM. To do this, switch off your HP printer and then hold down the ‘Go’ key for around 20 seconds while switching the printer back on again.
- HP 1200 and 1100 models resetting: To do this, simply change the data by going into the service mode. This is applicable if your HP printer has a display panel. Otherwise you need to hold down the ‘Go’ button for around 5 seconds while the printer is switched on.
- HP 2100 printer resetting: You need to press the ‘job cancel’ key after switching off the printer. Then switch the printer on and only then release the key called ‘job cancel.’
- HP 2200 printer resetting: Switch off your printer and then hold down the ‘Go’ key. Switch back the printer on while holding the ‘Go’ button till the light comes on. Then release the button.
- HP 6P and 5P models resetting: Switch off your printer and then press the ‘reset’ button and within 20 seconds switch on the printer back again.
Resetting a Dell printer
You can reset your Dell printer fairly easily by simply double-clicking on the ‘Reset Dell Printer’ icon. You can reach this icon by clicking on the folder ‘UAN’, then clicking on ‘System Utilities’ and you should find the icon. However, one word of caution – this method will function only if the USB cable has been directly connected from the PC to the printer.
Resetting a Lexmark printer
You will firstly need to switch off your printer. Then simultaneously press the RETURN and READY keys while switching the printer on. This will take you to the Diagnostics Mode. The display unit will show the message ‘Performing self test’. Choose ‘Maintenance count’. Reset the count to make it zero. Then select the RETURN key and go back Diagnostics Mode. Then you can reset the printer to go back to the normal mode.
Resetting Brother Printer
You need to keep pressing the DOWN or UP keys a couple of times till you see ‘Maintenance 99′ displayed on the display. Then hold down the ‘Set’ button to go to standby mode. Please note that if you press the exit key only after typing in a single digit then the machine goes to maintenance mode in initial stages.
Resetting Samsung printer
You need to press the following keys in quick succession – MENU # 1 9 3 4. Then you should see a message on your display saying ‘TECH.’ Then again select the MENU key followed by ENTER. The display will now show ‘TECH MODE.’ Then select the ‘
Learn About The Three Basic Types Of Computer Mouse
1) Mechanical: This is a type of computer mouse that has a rubber or metal ball on its underside and it can roll in every direction. Sensors within the mouse, which are mechanical, detect the direction in which the ball is moving and moves the pointer on the screen in the same direction. A mouse pad should be used under the mouse to run on.
2) Optomechanical: This type is the same as the mechanical mouse except that it uses optical sensors to the motion of the ball. A mouse pad should be used under the mouse to run on.
3) Optical: This type uses a laser for detecting the mouse’s movement. You don’t need a
mouse pad but you can use one made for optical mice. Optical mice do not have any
mechanical moving parts. This type responds more quickly and precisely than the mechanical and optomechanical mice and now that they have been around awhile the price is pretty comparable.
How does a computer mouse hook up to the computer?
Serial mouse: these ones connect directly to an RS-232C serial port or a PS/2port. This is the simplest type of connection.
PS/2 mouse: connects to a PS/2 port.
USB mice
Cordless mouse: These are not physically connected to the computer. They rely on infrared or radio waves to communicate with the computer. Cordless are more expensive than both the serial and bus mouse. The nice thing is that there is no cord to constrain or get in your way.
Disadvantages of a Laser Printer
There are very few disadvantages to owning a laser printer in general but one of them is definitely the cost. The money that you could spend on a very high-end inkjet printer will only buy you a very low-end color laser printer with limited capacities. Color laser printers with multi-functions such as a copier and a fax all in one are even more expensive. However a middle of the line black and white laser printer is comparable to the price of a top of the line color inkjet printer.
Another disadvantage is the cost of the cartridges inside a laser printer. Sometimes the cartridges cost almost as much as the printer did which is why many people throw the entire printer out and buy a new one after the cartridge expires in year or two.
The cartridges for laser printers are several times more expensive then the cost of the toner cartridges for inkjet printers. However they do last longer especially if you remember to set the printer in black and white printing mode when printing black and white and only using the color mode when it is really needed. Another way to make an expensive color laser toner cartridge last longer is to keep the printer in low quality mode unless you are printing out the final document.
If you live in a hot or humid climate a laser printer may not be the ideal solution for you. This is because running these machines can make a room very hot. The fuser inside them, which is the device that melts the plastic granules that constitute the powder that makes up the toner onto the paper, heats up to as high as 200 degrees Celsius.
Another limitation of a laser printer is that they only really print on certain kinds of paper. If you want to print out photographs then a laser printer is not for you as they are not yet capable of printing high-resolution images. Also you cannot put photographic paper through a laser printer. For the best quality images you need to buy a bubble jet ink printer that can transfer an image onto photographic paper. The color quality that you get with a bubble jet ink printer is just as good if not better than the color quality that you can obtain with a laser printer. A high-end color printer that produces quality color images can cost as much as $3,500 to $10,000 whereas you can get a good quality ink jet printer for about $200.
Another disadvantage of laser printers is that many of them are limited by the amount of memory that they are sold with. This can sometimes limit the number of fonts that you can use. To expand the memory of your color laser printer you usually have to buy a small RAM board. This is the only reliable way to install memory so that the color laser printer can utilize a number of fonts.
The more expensive a laser printer is the faster it is. The affordable models only print out about four pages a minute. Top end models print out about twelve pages a minute but they are not really affordable for the individual.
Laser printers, especially the color laser printers, can also be heavy and take up a lot of desk space or room in the office. At the time of writing there was also no such thing as a portable laser printer. The reason that a portable laser printer has yet to be invented is because a battery does not yet exist that is small enough to provide laser printer functions with enough power so that it can be taken on the road.
Cutting Costs In The Office
With so many overhead costs involved, running an office can be an expensive endeavor for the small business owner. Even large companies struggle with the costs of running an office as well. Many companies get into a routine of office spending, thinking that all the materials they are currently using and the methods of obtaining them are necessary. But if you’re a business owner or office manager, struggling to pay for your office materials, perhaps it’s time to re-think the way you run the office. Here are a few tips for cutting office costs.
First, take an inventory of all the materials you use from month to month. It’s a good idea to look over accounting and spending reports to see where money is going for office supplies. As an office manager, don’t be afraid to cut down on office waste. Small items like pencils, pens, and paper clips are easily lost and often replaced. Although it may seem like a small expense, those costs can add up. Assign someone in the office to monitor and distribute office supplies.
People are less likely to waste supplies if they know their actions are being tracked. Another huge office expensive is paper, printers, and copiers. In fact, this may be the area where you spend the most. If you are buying manufacturer toners from an office supply store, consider switching to a bulk toner or ink cartridge supplier that can provide compatible inks at half the cost. Also, buying paper in bulk and storing it can save costs as well. By following these steps, you’ll be able to cut down on office spending.
How To Recycle & Refill Kodak Printer Ink Cartridges
Recycling printer cartridges has extremely vital benefits for the society. The consumer gets a huge economic benefit, and the environment insuperable benefits. Recycling cartridges is a means to save money and fuel, reduce garbage and prevent pollution. Many printer and cartridge companies have taken the initiative to recycle by refilling or remanufacturing. Hence one way of recycling is to send the cartridge back to the place from where the cartridge has been purchased. Another easier way is to refill the cartridge and reuse the recycled one.
Recycling or refilling of some printer cartridges is extremely easy that anyone can refill but in some cases refilling can be messy and difficult.
Kodak Printer Ink Cartridges (One Color)
In Kodak printer ink cartridges the ink is retained due to the presence of internal sponge in the cartridge. The following steps can be used for the easy refilling of these cartridges.
1. Spread some absorbent material like a newspaper or a towel in order to avoid mess.
2. Create a hole in the top lower flat surface using a drill or a heated pin. Drill a hole 1/3rd of the way from the edge. Make the hole where the letter ‘K’ is written.
3. Fill ½ of the syringe bottle with ink about 10 to 15ml.
4. Insert the needle into the cartridge and inject slowly into the sponge. Inject deeply so that the sponge gets saturated.
5. You can reseal the hole but it is not necessary.
6. Expect some dripping but for greater results leave the cartridge overnight. Seal it if you have to transport it.
Kodak Printer Ink Cartridges (Colored & Photo Cartridge)
The colors of ink used in these cartridges are:
o Red (or magenta)
o Blue (or cyan)
o Yellow
The first step for refilling ink cartridges remains the same:
1. First the lid has to be removed. This can be done with a sharp knife at the intersection of colored and black plastic. Remove the lid.
2. Insert a pin or toothpick into each hole in order to check the different colors in chambers.
3. Fill the syringe bottle about 1/8th with ink which is 5ml for each chamber.
4. Insert the needle into the cartridge and slowly inject so that the internal sponge gets saturated. All colors may not empty fully so the sponge will not soak fully.
5. Repeat the 2nd and 3rd step for the other two colors and fill the chambers with different syringes.
6. Place the cap back on top and tape it.
7. Expect some dripping but for greater results leave it overnight.
Kodak Printer Laser Toner Cartridge
The refilling of Kodak laser toner cartridge should be done at a place where there is no breeze. It is flammable so work where there is no flame. Also do not inhale as it is irritating. The three basic types of Kodak laser toner cartridges are:
o Canister: tube for holding toner
o Drum: cartridge with gears and a drum with a gelatin coating
o Toner and developer: similar to drum cartridge but uses toner and developer both.
Kodak Canister Cartridge
1. Spread some absorbent material like a towel or newspaper. Find a plug at the end of cartridge.
2. Remove the plug. If you don’t find it then create a hole which does not come in the way of the paper path (a smooth plastic surface).
3. After creating a hole carefully remove the shavings.
4. Shake the bottle of toner and pour the entire bottle into the cartridge with a funnel or paper funnel.
5. Put the plug back and seal with a black electrical tape.
6. Install in the printer.
Kodak Drum Cartridge
These are complex cartridges. The ‘pretty’ drum may have three colored coatings: red, blue or green. Before refilling locate its toner and waste hopper following these points:
1. Locate the drum and imagine that it runs down to the end of the cartridge.
2. Lay it down to that the drum runs from left to right in front of you. The side near to you is the ‘near side’ and the one far from you is ‘far side’.
3. One of these sides is larger than the other.
4. The largest side is ‘toner hopper’ and smaller one is ‘waste hopper’.
Now to refill follow the following steps.
i. Locate the drum but do not touch it. It can be under a shutter.
ii. Find the toner hopper. You will see a translucent plug on one side. Remove it. If you do not find it then create a hole in the toner hopper away from the paper path.
iii. Vacuum the drum of shavings but do not touch the drum.
iv. Shake the bottle of toner and pour the entire bottle into the cartridge with a funnel.
v. Seal the hole with the pug or a black electrical tape.
My Router Isn’t Connecting to the Internet
Routers are, for the most part, easy to setup and maintain, but sometimes issues come up that can be frustrating. This article addresses some common problems people have with their router.
Router settings are accessed with a web browser. One of the most common issues router owners have is that they don’t remember how to log into their router. Directions for accessing the router are often written on a sticker on the bottom or back of the router.
You need to be connected to the router in order to access the router’s settings (unless your router has the ability to be connected to remotely). To access the router open a web browser and type in the router’s IP address into the address bar. This is usually 192.168.0.1 or 192.168.1. If that doesn’t work, type in “ipconfig” and look for the IP address for your network adapter. Copy the number you find, except you’ll need to change the number after the third period to a 1.
Depending on your router’s settings you may have to connect to the router with an Ethernet cord to access the router’s settings. To do this, securely connect the Ethernet cable to the Ethernet port on the computer and the Ethernet port on the router.
Often when people change the default username and passwords on their router, they end up forgetting them. It’s a good idea to take some masking tape and write your username and password on your router so you can easily find it. If you have forgotten your login information you will need to reset your router’s settings.
To reset the router locate the reset button which is usually a small hole on the rear of the unit. Use a paperclip to press the reset button and hold it down for 10 seconds. After you release the button the router will reset.
If you have access to the network but not the internet check the status of the router’s lights. Check to see if the internet light on the modem is indicating the correct status. If it isn’t, check that the internet modem has access to the internet and check to see if the network cable is securely attached to the Ethernet ports between the router and the modem.
If you cannot get internet access you’ll need to manually set some of the router’s settings. You may need to contact your internet service provider for these settings. If the status light on the router indicates that it has an internet connection, check any firewalls on your computer that may cause interference to/from the internet and make sure they’re setup properly.
Computer Mouse As Mobile Memory Mouse
The computer mouse is the most essential accessory of the computer and the latest to hit the market is the mobile memory mouse which can actually store files and transfer them with the help of USB ports. Another interesting feature is the wireless technology because it has been fitted with 2.4GHz technology and the USB mini trans receiver. It has a rechargeable USB which has to be plugged into the computer even as one is working and it gets charged automatically. After use it has to be inserted back into the mouse because it works on battery charge. The battery life indicator glows in red when the battery is low.
The modern age mouse is equipped with high definition laser technology which enhances performance, ensures smoother tracking and faster responses from the mouse. The cordless mouse has a maximum supporting operating distance of about 9metres and hence it is ideal for notebook users as it is easier to carry. The mouse now has five programmable buttons which adapts to the users needs thereby providing better service and comfort to the user. The optical technology makes the mouse pad redundant. Any flat surface is enough to make the mouse functional. Some of the latest additions to the market use the adaptable diamond eye technology which provides faster movement identification.
Keeping in mind the right hand bias, the mouse of today has been designed in such a way that both left handed and right handed users are comfortable using it. There is also the magnifier point and four way scrolling function. A special case has been provided for carrying the mouse. A bluetooth mode switch is also provided along with the switch button to turn it off or on. The cordless laser mouse offers a zoom wheel and runs on AA type batteries. The auto shut off option helps one to save on power.
The forwards and backwards button helps us to navigate the internet with ease. The scroll wheel is totally frictionless and this ensures that the computer mouse can literally fly through long documents smoothly and very fast. Some batteries run for 6months and others for 2 years. Unlike the optical mouse the new mouse can take any kind of surface to function very smoothly. Some have non slip side rails for better hold.
The gaming mouse is so swift and precise that the resolution is 1600dpi which is said to be twice the amount that is offered by the conventional mouse. There is also the tactile response design which is specially designed for the gaming experience. There are seven physical buttons integrated into it and they are all independently programmable. The new age mouse comes in attractive and eye catching colours and makes a classy new statement to the users’ inventory of computer accessories.
How to Setup Your Wireless Hewlett Packard Printer? Discover the 6 Simple Steps Now!
Wireless printers are ideal for multiple computer networks or offices use, because the printer is connected to all the computers through the wireless network. However, setting up the wireless printer is not an easy task because you need to set up the wireless network at the same time. Please note that your computer must have the wireless capabilities in order to connect to the wireless printer and it is important to make the whole process work out.
So, what are the 6 simple steps for setting up the Wireless HP Printer? It is this…
First, you need to insert the CD that comes with the Wireless HP Printer into any computer. The CD will allow you to setup the initial software and also allow you to configure the initial network settings
Follow through the CD instructions, you might now choose what components you want to install in your computer. You do not need to install all the components as it is not necessary for printing purposes
After that, you might turn on the printer without connecting to the computer. Sometimes if the printer did not recognize by the software, it might ask you to connect the printer and computer by using the U.S.B cable
After everything has installed properly, you might need to input the name and IP address.
Now, press continues to complete the setup process. If by any chance you are installing the components from the software, it might take you about 30 minutes for the whole installation process.
After the installation process is done, you can setup for other computers by going to “Start”, choose “Printers and Fax” and “Add a Printer”. You will then choose “A Network Printer” and you could view the listed printers available around your area. Find the name where you input on step 4 and access to your wireless printer. Then click “OK” when you are done.
Warning: In order to avoid any troubles during your installation process, it is always great to read the user ‘s manual thoroughly before setting up anything.
A Review of the Best Printer: The Canon PIXMA MX870 Wireless Office All-In-One Printer
The best printer is difficult to find, but who’s the real judge anyway? If you ask me, there’s only one printer which I can really call the best, and that is the Canon PIXMA MX870 Wireless Office All-in-One Printer. To know more about it, I have created this review to answer all your questions.
Design
This model is quite unique in appearance. It isn’t like the conventional rectangular prism-shaped printers which you normally see on the market. The device has a trapezoidal top which contains all the controls and buttons as well as the LCD display for easy access and navigation. The dimensions of the device are 19.4″ x 17.1″ x 8.9″ and it weighs 26.1 pounds which makes it easy to place on any tabletop, desktop, or shelf. And because of its wireless capabilities, you aren’t confined to placing it in an area near your computer, preventing the clutter and build-up of all sorts of devices around your PC.
The buttons are very simple to use and navigation is made even easier by the 2.5” LCD display where you can directly view, edit, and print your documents and files without needing a PC. There are also various memory card slots and other removable storage device ports for easy file reading, so you have various options for where you will save your important data and images to print without a PC.
Printing and Other Functions
The inkjet printer can print 4×6 photos borderless in as fast as 39 seconds. The resolutions of the printouts it can produce are excellent as well. For black ink, the document can produce 600×600 dpi, while for colored images, it can produce 9600×2400 dpi.
The device, as an all-in-one, can also copy, fax, and scan. The scanner has three methods of input: optical, ADF, and interpolated scanning. The optical scan can create images of 2400×4800 dpi resolution, the ADF can produce 600×600 dpi resolutions, and the interpolated images can reach up to 19,200×19,200 dpi resolutions. The flatbed can only read a maximum document size of 8.5” x 11.7” while the ADF can read legal size papers (8.5” x 14”).
The copier can reproduce documents and images with a speed of 4.3 inches per minute, and you can also reduce and enlarge your documents to as big as 400% and as small as 25%. The copier has a variety of functions which include 4-in-1/2-in-1 copy, AE (Auto Exposure/Intensity) copy, auto duplex copy, borderless, fit-to-page, gutter shadow correction copy, image repeat, Intensity, multiple copies of up to 99 pages, preset copy, ratios, sort (ADF), and zoom.
The fax machine can transmit to a speed of approximately three seconds per page for black documents and 1 minute per page for colored documents. It can save up to 250 pages in memory. The fax function also allows speed dialing for up to 100 numbers. Other features of the fax include answering machine connectivity, group dialing, one-touch speed dialing, redial, and remote reception. This is really the best printer for me, and if you aren’t convinced yet, then there are some other features that you still have to know.
Other Features
This model is also featured in Canon’s Generation Green product line. This aims to produce printers that are environment-friendly and energy-saving which is actually a movement to promote the preservation of Mother Nature. The features included in this program are numerous. One of these is the qualification as Energy Star device. This model is an Energy Star qualified machine which means that it can save up to 25% more energy compared to other non-qualified models. It also has automatic double-sided printing which allows you to save more paper. The Quick Start feature makes the printer easy to use because it makes printing faster and easier to set up so you save more energy. Individual ink tanks also save more cartridges because you get to replace inks one color at a time, unlike 4-color cartridges which need to be replaced even if all colors aren’t out yet.
Conclusion
By now, you may have understood why I consider this as the best printer I have owned. But I don’t want you to just take my word forit, I also want you to experience the benefits of the Canon PIXMA MX870 Wireless Office All-in-One Printer. I can confidently recommend this to anyone out there who’s looking for an all-in-one device with excellent features, and I doubt anyone would be disappointed in it.